I have a client using centralised call control and local unity express on the remote sites, when a user dials in on a remote site via a local E1 the call is routed to a local auto attendant on the unity express, it appears the caller can input only numbers known via the local subscriber list on the local unity express, you cannot dial a number that may be located on another site that has not got a subscriber referance on this site, is this normal? and what solution could i implement to have availablity of all numbers in the enterprise, should i be using unity networking, or is there another option?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...