I am writing a Unity Express script and I am trying to use the Switch String object to process clls differnely based on what number was called. I have tried using the Get Call Contact Info object to populate a variabnle with either the Called Number or Original Called Number value, but no matter what the Switch String always send the call to the Default path. The Original Called Number is definitely being seen on the CME as I can see it in the call history.
Does this info not get passed from CME to CUE, or does it need specific config to do so? Or have I simply got the Switch String configured wrong?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...