Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Unity Express VMail passwords

Is it possible to configure Unity express to not require passwords. I know that when you first set up users, you can give a blank password initially. but when the user enrols, it makes you set a password. Is there a way to set the system so that it is not compulsory for users to set a password when they enrol.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Unity Express VMail passwords

Hi David,

This is not possible my friend.

User Interfaces/Passwords

Cisco Unity Express R1 has three separate user interfaces: a GUI, CLI and TUI (subscriber telephony interface). There are two types of users: administrators and end users (subscribers). Administrators can have access to the GUI and the CLI; subscribers can have access to the GUI and TUI.

The GUI and CLI login protections are referred to as a "password", while TUI login protection is referred to as a "PIN".

GUI

All User IDs defined on the system are password controlled on login, regardless of whether the User ID has administrator or subscribers privileges. Passwords are **mandatory and are 3 to 32 characters long, case sensitive, and allow alphabetic and numeric characters.

TUI

All mailboxes defined on the system are PIN controlled on login. PINs are **mandatory, are 3 to 19 characters long, and allow numeric characters.

From this good CUE Security doc;

http://www.cisco.com/en/US/netsol/ns340/ns394/ns165/ns391/networking_solutions_design_guidance09186a00801f8e31.html#wp41238

When the password is left blank in the initial config, CUE marks it as expired and forces the user to set one.

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: Unity Express VMail passwords

Hi David,

This is not possible my friend.

User Interfaces/Passwords

Cisco Unity Express R1 has three separate user interfaces: a GUI, CLI and TUI (subscriber telephony interface). There are two types of users: administrators and end users (subscribers). Administrators can have access to the GUI and the CLI; subscribers can have access to the GUI and TUI.

The GUI and CLI login protections are referred to as a "password", while TUI login protection is referred to as a "PIN".

GUI

All User IDs defined on the system are password controlled on login, regardless of whether the User ID has administrator or subscribers privileges. Passwords are **mandatory and are 3 to 32 characters long, case sensitive, and allow alphabetic and numeric characters.

TUI

All mailboxes defined on the system are PIN controlled on login. PINs are **mandatory, are 3 to 19 characters long, and allow numeric characters.

From this good CUE Security doc;

http://www.cisco.com/en/US/netsol/ns340/ns394/ns165/ns391/networking_solutions_design_guidance09186a00801f8e31.html#wp41238

When the password is left blank in the initial config, CUE marks it as expired and forces the user to set one.

Hope this helps!

Rob

New Member

Re: Unity Express VMail passwords

many thanks Rob,

exactly what I was looking for.

Hall of Fame Super Red

Re: Unity Express VMail passwords

Hi David,

You are most welcome :)

Cheers!

Rob

134
Views
0
Helpful
3
Replies
CreatePlease to create content