Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Unity gurus -- call handler issue

Greetings!

So I'm in the middle of setting up a CCM 8.5 and Unity Connection 8.5 enviorment.  I've setup my call handler, and assigned extensions to them.

Issue -- When I dial the main number for the call handler (Assigned extension 6752) the system prompts me to enter my id as if i'm signing in instead of going to the call handler.  I'm sure it's something simple somewhere, what am I missing?

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Unity gurus -- call handler issue

Loging to Unity Connection Admin Page, go to Routing Rules and ensure you do not have something defined for this 6752 number. 

Is the issue only if you can this call hanlder, what if you call others or if you can another phone that forwards you to VM?

Chris

13 REPLIES
Hall of Fame Super Red

Unity gurus -- call handler issue

Hi Marcus,

In most cases I would set up 6752 as a CTI-RP in CUCM with a Call Forward All

to Unity Connection. Is this how you are routing calls from CUCM to CUC?

Cheers!

Rob

New Member

Re: Unity gurus -- call handler issue

Hi Rob,

I currently do have the 6752 setup as a Translation Pattern in CUCM with all calls being forwarded to voicemail_css

Hall of Fame Super Red

Unity gurus -- call handler issue

Hi Marcus,

On the CTI-RP page I see 6752 listed twice with two different partitions. Is this by design?

Cheers!

Rob

New Member

Unity gurus -- call handler issue

Yup! We have 2 seperate sites, 1 partition transfers to 6752 on site 1, second partion transfers to 6752 on site 2

Hall of Fame Super Silver

Unity gurus -- call handler issue

is this SIP or SCCP VM integration? If SIP make sure you have Diversion Header checked on your SIP trunk, and not using "External phone number mask" on the Route Pattern.

Also, check your UCON Forwarding Routing Rules.

HTH,

Chris

New Member

Unity gurus -- call handler issue

All SCCP.

Hall of Fame Super Silver

Unity gurus -- call handler issue

Did you look at your Routing Rules on UCON?

Chris

New Member

Unity gurus -- call handler issue

Chris are you refering to the CTI route points? Or what specifically do you want me to look at?

Hall of Fame Super Silver

Unity gurus -- call handler issue

Loging to Unity Connection Admin Page, go to Routing Rules and ensure you do not have something defined for this 6752 number. 

Is the issue only if you can this call hanlder, what if you call others or if you can another phone that forwards you to VM?

Chris

New Member

Unity gurus -- call handler issue

Hi Chris,

There was a forward routing rule, that was not referencing 6752.  I removed it, and the calls are going to the call handler now (weird)

Chris got the point!

Now to figure out how to configure the routing without screwing up my phone trees! thanks guys

Hall of Fame Super Red

Re: Unity gurus -- call handler issue

Hi Marcus,

I'm sorry to be so dense here, but this part lost me completely

We have 2 seperate sites, 1 partition transfers to 6752 on site 1, second partion transfers to 6752 on site 2

Are you saying there are 2 - 6752 Call Handlers??

Maybe if you could explain the call flow and relation to the Partitions I might clue in.

Sorry man!

Rob

New Member

Re: Unity gurus -- call handler issue

Hi Rob!

We have two 6752 Call handlers.

SJC partition -- 6752 -- SJC Call Handler for the SJC Campus

MVC Partion -- 6752 -- MVC Call Handler for the MVC Campus

Before, both unity servers were seperated. 

The new setup the unity servers are in a cluster.  I've tried removing the 6752 reference from the MVC Call handler, on the off chance that there was a conflict, but that doesn't resolve the issue (Which is why I think it's something simple that im missing)

New Member

Unity gurus -- call handler issue

One additional sympton! I have some voicemail boxes setup, when I dial them, it does not go to the voicemail box but sends the call to the login prompt as well.  It has to be something simple doh!

662
Views
0
Helpful
13
Replies