I have a BE6000 server, with CUCM 9.1 deployed which includes Cisco Unity. One Guest VM with both Call manager and unity on it. I have a router running in SRST mode all on the same site in case of CM failure.
I would like to have Vmail functionality in the case that CM is not available, now due to the fact the CM and Unity is actually the same server, this will only be required if the CUCM database is problematic, cause if it's either hardware/vm failure unity will also not be available.
I have researched Unity integration with SRST, but everything I find relates to a centralized CM cluster with unity and srst failover in the case of Wan failure, or registering SRST with a local Unity server.
I have deployed CUCME in SRST mode, but the problem I have is that in CUC I cannot add another server on the telephony intergrations/phone systems page. It's all greed out and only has 1 server with the local host IP, I.e. 127.0.0.1. See pic attached
Is this because I have BE6000 CUCM which has CUC installed as part of the suite. I do not have a separate CUC server.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...