Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Unity integration

Hi all,

We are looking to integrate our current PBX Meridian system with our Unity solution.

My question is; will the message waiting indicators still work on our Meridian numbers while integrated with Unity?

Thanks

4 REPLIES
Hall of Fame Super Red

Re: Unity integration

Hi Jamie,

Yes, MWI is fully supported in this integration :)

Cisco Unity Configuration Guides

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_and_configuration_guides_list.html

Nortel Meridian 1/PBXLink Integration Guide for Cisco Unity 5.0

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/integration/voice_card/guide/nopbcu5x.html

Setting Up a Nortel Meridian 1 Digital PIMG Integration with Cisco Unity

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/integration/pimg/guide/cuintpimg120.html

Hope this helps!

Rob

Community Member

Re: Unity integration

Thanks for the reply Rob.

If we go down the PBX link box route can the Unity servers not pick up caller info from the calling number?

Are the link boxes essential?

Thanks,

Jamie

Hall of Fame Super Red

Re: Unity integration

Hi Jamie,

It is the link boxes that provide the CLID/MWI etc. between Unity and the Nortel. You can also use the PIMG or TIMG integration setups. But all three scenarios require a "third party" box/boxes to enable the communications between these two systems.

Cheers!

Rob

Community Member

Re: Unity integration

Thanks for the info Rob very helpful

165
Views
0
Helpful
4
Replies
CreatePlease to create content