Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity Message Monitoring Delay

I have recently enabled Unity message monitoring on V5.x for a customer and they are saying that when you call someone with it enabled there is approx 5 sec delay before you hear the mailbox greeting played, is this normal or is there a way to reduced the time 5 sec delay?

Any pointers would be very helpful

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Unity Message Monitoring Delay

Hi,

This is the related bug;

Message Monitor: When configured delay in hearing greeting.


http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi80906&Submit=Search


CSCsi80906 Bug Details

MM:when config'd delay in hearing greeting

Symptom:
When Message Monitor is configured for a subscriber's phone, the caller hears a delay after the call is forwarded to Unity but before the caller hears the subscriber's greeting.

Conditions:
Unity 5.0(1) or later.
Message Monitor is configured for the subscriber's phone.

Workaround:
The delay can be reduced to 3-4 seconds by applying the latest Unity 5.0(1) ES, or by upgrading to Unity 7.0(1). However, there not a way to reduce the delay beyond this point.

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: Unity Message Monitoring Delay

Hi,

This is the related bug;

Message Monitor: When configured delay in hearing greeting.


http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi80906&Submit=Search


CSCsi80906 Bug Details

MM:when config'd delay in hearing greeting

Symptom:
When Message Monitor is configured for a subscriber's phone, the caller hears a delay after the call is forwarded to Unity but before the caller hears the subscriber's greeting.

Conditions:
Unity 5.0(1) or later.
Message Monitor is configured for the subscriber's phone.

Workaround:
The delay can be reduced to 3-4 seconds by applying the latest Unity 5.0(1) ES, or by upgrading to Unity 7.0(1). However, there not a way to reduce the delay beyond this point.

Hope this helps!

Rob

New Member

Re: Unity Message Monitoring Delay

Thanks Rob for your speedy reply,

I will now go back to the customer and see if they want to upgrade for the gain of  1-2 seconds !!

E

227
Views
0
Helpful
2
Replies