You would create a subscriber in Unity giving it a passcode. People would call into this subscriber through a DID number. This would play some sort of message of your choice and attempt release to switch to a specific number. Lets just say 1000, so users didn't have to get into callmanager you can forward 1000 from a phone to whatever extension you would like. This does not accomplish the two different phone numbers at the same time but is the only possible way to give users controll.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...