Unity VM Port usage between Server and IP Handsets
Our aim is to install our Cisco CallManager Cluster (4.3) and Unity Voice-Mail Server (4.1) behind a Firewall.
Can somebody please tell me if there are other ports I need to enable to establish communication between our 7941 and 7961 Handsets and the Unity Server.
I have confirmed that the RTP UDP Ports 22800-32767 will be needed.
Will I also need to allow the DCOM range of ports to allow access to the Media Master. I know you can decrease the default DCOM range from 1024-65535 on Unity but are the DCOM ports needed between IP Handsets and Unity?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...