I have a single publisher 6.1.2 setup with remote sites. The solution uses Voip over PSTN. AAR works fine for calls from phone to phone over the pstn but the remote sites are unable to connect to voicemail or dial the vmail pilot number. Voicemail works fine from local site. I can see the call connect through the gateways and be sent to Call Manager but all i get is a re-order tone.This probably means that aar on voicemail is fine but unable to connect to unity vmail.
Unity 1.2 (4 digit pilot number)
Gw - 3725's using voip hairpining for test purposes
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...