Hello guys I have 2 unity servers (5.0) that a software has detected 4 and 5 level vulnerabilities on them. Both servers are running windows server 2003 with SP 1. Could it be an issue if I applied the recomended patches to them? . And also we are pretending to upgrade the operating system from windows server 2003 SP 1 to windows server 2003 sp 2, do any body has done this, it is safe doing this 2 actions?
If an update is not installed by SUW and not approved by Cisco, you install it at your own risk. It may not cause a problem, but if it does, Cisco will not support the product until this update is removed.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...