Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Unknown EEPROM cookie

I have a lab router with a VIC2-FXO and VIC2-FXS cards. Everything has worked just fine on it until the other day I blew the config away to start over with the lab. Now I cannot configure voice ports.

A show diag shows the voice cards but on the PVDM slot it now shows the following:

JSM_1740_VG#show diag

Slot 0:

        C1760 1FE VE 4SLOT DV Mainboard Port adapter, 5 ports

        Port adapter is analyzed

        Port adapter insertion time unknown

        EEPROM contents at hardware discovery:

        Hardware Revision        : 3.0

        PCB Serial Number        : FOC07220T3X

        Part Number              : 73-7167-03

        Board Revision           : A0

        Fab Version              : 04

        Product (FRU) Number     : CISCO1760

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 03 16 41 03 00 C1 8B 46 4F 43 30 37 32

          0x10: 32 30 54 33 58 82 49 1B FF 03 42 41 30 02 04 FF

          0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        Packet Voice DSP Module Slot 0:

        Not populated

        Packet Voice DSP Module Slot 1:

        Unknown EEPROM cookie

        VIC Slot 2:

        Dual FXO Voice Interface Card

        Hardware revision 1.1   Board revision K0

        Serial number     0029485045    Part number    800-02495-01

        FRU Part Number   VIC-2FXO=

        Test history      0x00          RMA number     00-00-00

        Connector type    WAN Module

        EEPROM format version 1

        EEPROM contents (hex):

        0x20:   01 0D 01 01 01 C1 E7 F5 50 09 BF 01 00 00 00 00

        0x30:   A0 00 00 00 03 01 04 01 FF FF FF FF FF FF FF FF

        VIC Slot 3:

        Dual FXS Voice Interface Card

        Hardware revision 1.1   Board revision B0

        Serial number     0025082140    Part number    800-02493-02

        FRU Part Number   VIC-2FXS=

        Test history      0x00          RMA number     00-00-00

        Connector type    WAN Module

        EEPROM format version 1

        EEPROM contents (hex):

        0x20:   01 0E 01 01 01 7E B9 1C 50 09 BD 02 00 00 00 00

        0x30:   58 00 00 00 01 03 12 01 FF FF FF FF FF FF FF FF

Has anyone seen this before?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Unknown EEPROM cookie

Try reseating the pvdm modules.

2 REPLIES
Hall of Fame Super Gold

Unknown EEPROM cookie

Try reseating the pvdm modules.

Community Member

Unknown EEPROM cookie

Looks like the slot went bad on the router. When I moved it to Slot 0 it came up, reseating in slot 1 gave the same error.

Thanks

431
Views
0
Helpful
2
Replies
CreatePlease to create content