I have a IP PHone 7942G that is working fine with CME with SIP Protocol.
Now I would like to configure manually the IP Phone 7942G to register to Asterisk Server.
But I can not edit SIP Configuration in the IP Phone. I'm already typed **#, and the the password, and it showed Unlocked Message, but still block to edit SIP Configuration. Is there any other procedure to edit SIP in the IP Phone?
what I know you can erase the SIP configuration but I do not know if there is a method to change manually,to erase it go to SIP configuration
**# unlock and you will find more >> erase
I think you need to check if you are in the right way to register Cisco IP phone with Asterisk, I do not have enough information about the integration with Asterisk but what I know you need to change some XML configuration.
And while you are Cisco Employee why you need to use Asterisk
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...