I am trying to regsiter the FXS ports of a VG248 gateway to a cisco callmanager express router runing ios c2800nm-advipservicesk9-mz.124-24.T3. from the VG248 gateway i can ping the router running callmanager express and vice versa.
the VG248 220.127.116.11 conects to a router 18.104.22.168 and then the 22.214.171.124 connects to the CCme 126.96.36.199
this is the configuration on the VG248
ip address 188.8.131.52 subnet mask 255.255.255.224 default router 184.108.40.206
callmanager TFTP server 220.127.116.11
and this is the config on the router running callmanager express
ephone 20 no multicast-moh device-security-mode none mac-address 0BBE.5CB9.D623 max-calls-per-button 2 type vgc-phone button 1:20
telephony-service directory entry 8 2019 name test
I know that to register a port you have to put example port 23 at the end of the Mac address of the VG248 and remove 2 digit from the front, that will be the Ephone mac address on the callmanger express.
when i do a show ephone unregistered on the CCME router this is what i get
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...