up up seized seized

[jafar.tarawneh]

Team,

I have a router showing the following:

sh voice port summary | i seized

2/0/0:0 09 e&m-wnk up up seized seized y

2/0/0:0 10 e&m-wnk up up seized seized y

2/0/0:0 11 e&m-wnk up up seized seized y

2/0/0:0 13 e&m-wnk up up seized seized y

2/0/1:0 14 e&m-wnk up up seized seized y

3/0/0:0 01 e&m-wnk up up seized seized y

3/0/0:0 02 e&m-wnk up up seized seized y

3/0/0:0 14 e&m-wnk up up seized seized y

what is:

up up seized seized

VS.

other status i have seen before.

is there a good doc that exapling ONLY what this status means.

DSP is showing ok.

this is a CAS setup to an alcatel PBX.

thanks

[paolo bevilacqua · Accepted solution]

Seized in telephony is an engaged circuit. the verbose output is show voice-port and the complete explanation is in the command reference.