Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

up up seized seized

Team,

I have a router showing the following:

sh voice port summary | i seized

2/0/0:0 09 e&m-wnk up up seized seized y

2/0/0:0 10 e&m-wnk up up seized seized y

2/0/0:0 11 e&m-wnk up up seized seized y

2/0/0:0 13 e&m-wnk up up seized seized y

2/0/1:0 14 e&m-wnk up up seized seized y

3/0/0:0 01 e&m-wnk up up seized seized y

3/0/0:0 02 e&m-wnk up up seized seized y

3/0/0:0 14 e&m-wnk up up seized seized y

what is:

up up seized seized

VS.

other status i have seen before.

is there a good doc that exapling ONLY what this status means.

DSP is showing ok.

this is a CAS setup to an alcatel PBX.

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: up up seized seized

Seized in telephony is an engaged circuit. the verbose output is show voice-port and the complete explanation is in the command reference.

1 REPLY
Hall of Fame Super Gold

Re: up up seized seized

Seized in telephony is an engaged circuit. the verbose output is show voice-port and the complete explanation is in the command reference.

730
Views
0
Helpful
1
Replies
CreatePlease to create content