We are running on CUCM 8.5.1. We have 4 different sites and there number of route patterns for outbound PSTN access(Haven't implemented std local route groups). We would like to optimize the existing outbound Call Routing and have planned create two new route groups and have the route list updated accordingly with the primary,secondary and tertiary ones. We have a Publisher and 4 Number of Subscribers and a TFTP Server.
I will be creating new groups. And I will be updating route lists with new route groups and then assign the route list to the route patterns.
Is there a way to do the update of route patterns all at once(bulk) and any specific sequence to have less impact to the call service. Many Thanks for your time and help.
Experts, Could someone pls help me by throwing light on the best practices or things to be careful while making route pattern update by reducing the impact Call Routing to the users (implicitly to Route Lists, Gateways)
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...