Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrade 7961g to SIP Firmware

Hi,

I need to change the firmware on a 7961g from sccp to a SIP image and I have downloaded the latest version 9.0.2 and it is a .cop.sgn file.   Does anyone know how I get that onto the phone or what I do with it.   All the guide I have found on the internet use .bin and .loads files so I'm a little unsure of what to do or if this is the right thing.

Many Thanks

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Upgrade 7961g to SIP Firmware

Hi,

I assume that you just have the phone and not Callmanager? if thats the case then this url should be useful

http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml

What you have downloaded is the SIP image for a Callmanager running Linux which is no good.What you need is the zip file

which is in the same place you got that file.

Cheers

Mark

HTH

Please rate useful posts

4 REPLIES
Bronze

Re: Upgrade 7961g to SIP Firmware

Hi,

I assume that you just have the phone and not Callmanager? if thats the case then this url should be useful

http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml

What you have downloaded is the SIP image for a Callmanager running Linux which is no good.What you need is the zip file

which is in the same place you got that file.

Cheers

Mark

HTH

Please rate useful posts

New Member

Re: Upgrade 7961g to SIP Firmware

That sounds about right, Ill download the right one,

Cheers

New Member

Re: Upgrade 7961g to SIP Firmware

Would you be able to tell me which one I need to download as there were three there, is this the one I need: cmterm-7941_7961-sip.9-0-2SR1.zip

Thanks.

New Member

Re: Upgrade 7961g to SIP Firmware

There is a nice guide to SIP conversion for the Cisco 7961G

7418
Views
0
Helpful
4
Replies