Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

paa
New Member

Upgrade Callmanager 7.0.1 to 7.0.2

Hi!

I have a problem with upgrade UCM to recent version. I have fresh UCM 7.0.1.11000-2. I downloaded UCM upgrade UCSInstall_UCOS_7.0.2.20000-5.sgn.iso (both files). When I tryed to upgrade UCM, I got this error "The version number inside the selected upgrade does not match the filename". How can I fix this error? Should I first upgrade UCM to SU1a release?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Upgrade Callmanager 7.0.1 to 7.0.2

Hi Alexander,

This type of error can be caused when combining the 2.iso files. Check that the "final" filename is correct :)

Because of its size, the UCSInstall iso file, UCOS_7.0.2.20000-5.sgn.iso, comprises two parts:

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2

Procedure

Step 1 From www.cisco.com, download the two UCSInstall files.

Step 2 To reunite the two parts of the file, execute one of the following command.

Note Because the 7.0.2.20000-5 build is a nonbootable ISO, it proves useful only for upgrades. You cannot use it for new installations.

a. If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 > UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

b. If you have a Windows system, cut and paste the following command from this document into the

command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2+UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

Step 3 Use an md5sum utility to verify that the MD5 sum of the final file is correct.

03dcc9defcef6ba3d1196ea4820c7eae UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_2/cucm-rel_notes-702a.pdf

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: Upgrade Callmanager 7.0.1 to 7.0.2

Hi Alexander,

This type of error can be caused when combining the 2.iso files. Check that the "final" filename is correct :)

Because of its size, the UCSInstall iso file, UCOS_7.0.2.20000-5.sgn.iso, comprises two parts:

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2

Procedure

Step 1 From www.cisco.com, download the two UCSInstall files.

Step 2 To reunite the two parts of the file, execute one of the following command.

Note Because the 7.0.2.20000-5 build is a nonbootable ISO, it proves useful only for upgrades. You cannot use it for new installations.

a. If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 > UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

b. If you have a Windows system, cut and paste the following command from this document into the

command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2+UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

Step 3 Use an md5sum utility to verify that the MD5 sum of the final file is correct.

03dcc9defcef6ba3d1196ea4820c7eae UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_2/cucm-rel_notes-702a.pdf

Hope this helps!

Rob

Hall of Fame Super Red

Re: Upgrade Callmanager 7.0.1 to 7.0.2

Hi Alexander,

This type of error can be caused when combining the 2.iso files. Check that the "final" filename is correct :)

Because of its size, the UCSInstall iso file, UCOS_7.0.2.20000-5.sgn.iso, comprises two parts:

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2

Procedure

Step 1 From www.cisco.com, download the two UCSInstall files.

Step 2 To reunite the two parts of the file, execute one of the following command.

Note Because the 7.0.2.20000-5 build is a nonbootable ISO, it proves useful only for upgrades. You cannot use it for new installations.

a. If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 > UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

b. If you have a Windows system, cut and paste the following command from this document into the

command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2+UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

Step 3 Use an md5sum utility to verify that the MD5 sum of the final file is correct.

03dcc9defcef6ba3d1196ea4820c7eae UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_2/cucm-rel_notes-702a.pdf

Hope this helps!

Rob

1059
Views
0
Helpful
2
Replies
CreatePlease login to create content