07-03-2012 07:11 AM - edited 03-16-2019 11:59 AM
Hi,
I am doing an upgrade. I'd like you to confirm me if the following files for installation are correct:
Active partition: 6.1.2.1000-13
File to Install: UCSInstall_UCOS_6.1.5.10000-10.sgn
Inactive Partition: 6.1.2.1000-13
Active Partition: 6.1.5.10000-10
File to install: UCSInstall_UCOS_8.5.1.10000-26.sgn
Inactive Partition: 6.1.5.10000-10
Active Partition: 8.5.1.1000-26
Are those all file to complete the upgrade from 6.1.2 to 8.5.1?
The file: ciscocm.allow_upgrades_to_unrestricted.cop.sgn, is necesary?
Thanks!
07-03-2012 07:21 AM
Is there a reason you want to go to base 8.5.1 vs. 8.5.1SU4 for example? It would take the same amount of effort.
Check out compatibility matrix for supported upgrade paths:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
Why would you want to go to unrestricted version? What country are you in? Most typically installations are Restricted unless you cannot use it because you are in a contry that Cisco does not allow it.
HTH,
Chris
07-03-2012 02:40 PM
Thanks Chris.
About the version there is no particular reason. My country is Chile.
07-03-2012 02:44 PM
You should not need unrestricted version in Chile, so no need to run the cop file.
Chris
Sent from Cisco Technical Support iPhone App
07-04-2012 06:26 AM
Thanks Chris.
07-04-2012 06:53 AM
Matthew,
Did you require further assistance hence the low rating?
Chris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: