I have the Disk plus the license for the upgrade from 6.1(2) to 7.0(2) on my Linux 7835H2 servers.
I would rather upload the ISO viA ftp OR sftp but see that the image is boot.iso on the disk (after searching).
I take it that the disk is a bootable image, am I able to copy this image and upload it to the server via ftp/sftp?
I checked the downloads for CallManager 7.0(*) but see the following;
Cisco Unified Communications Manager 7.0(2) part 1 of 2 (non-bootable) - For upgrade from 7.0(x). Upgrades from 5.1(3)+/6.0(1)+ need to be requested via PUT (www.cisco.com/upgrade) or purchased to obtain the necessary license.
Am I able to go ahead and download images 1 & 2 then upload them after putting them together, I have the license already?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...