Upgrade to 6.1 NFR - CallManager service not starting
we are upgrading our lab callmanager to version 6.1.
WE have purchased an NFR license for partners (UC-6.0-NFR or something like that) and have purchased a brand new 7816 server.
Now we have migrated through DMA our lab 4.2.1 callmanager and have registered all licenses through the Cisco website.
Now we can see we have 80 available Device Licenses and 80 used and 1 available Node License and 1 used.
But the issue is that still we cannot start the CallManager Service and the message in the trace is the usual "NO FEATURE LICENSE FOUND". But we have followed the process for registration and cannot understand what is missing.
Re: Upgrade to 6.1 NFR - CallManager service not starting
You hit it right on the head. You are missing the license festure. Open a case with licensing. They will send you the correct license feature and your CM service will start. You may want to include the license they orginally sent you for refernce. The license person should be able to pick it right up.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...