Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Upgrade to 6.11b from 5.12 but still old phone firmware??

Upgraded to 6.11b from 5.12. When I do a Show, Software in CCM OSadmin the Active partition shows 6.1.1.3000-2 but installed software options still shows cmterm-devicepack5.1.2.3103-1.cop?? Doesn't the upgrade give you phone firmware that is compatible with 6.11b?? Also, went out to the download section for CUCM 6.1 and there are no cmterm devicepacks for 6.11?? Also, in CCMAdmin, device defaults showing phone firmware 8.3.3SR2S? Only have 7941,7961 and 7970 phones. Anyone know what download files I should be installing for these phones on 6.11b

Thanks in advance,

Tony

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Upgrade to 6.11b from 5.12 but still old phone firmware??

Hi Tony,

Not all upgrades include DevPacks, most do but not all. The newest firmware for the various models can be found here;

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser

cmterm-7941_7961-sccp.8-3-5.cop.sgn

Just as an FYI 8.3.3SR2 should be fine if you are not having any issues.

Check out Table 7

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp1268956

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: Upgrade to 6.11b from 5.12 but still old phone firmware??

Hi Tony,

Not all upgrades include DevPacks, most do but not all. The newest firmware for the various models can be found here;

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser

cmterm-7941_7961-sccp.8-3-5.cop.sgn

Just as an FYI 8.3.3SR2 should be fine if you are not having any issues.

Check out Table 7

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp1268956

Hope this helps!

Rob

New Member

Re: Upgrade to 6.11b from 5.12 but still old phone firmware??

Rob,

Thanks for the reply. I did find the documents you referenced before I posted, but I guess I missed the meaning of the "+" sign on the following:

cmterm-7941_7961-sccp.8-3-5.cop.sgn

7941/7961 SCCP IP Phone load - Compatible CUCM Versions: 5.0(4)+

Which means 5.0(4) and above, meaning 6.01 and 6.11b. Correct??

Tony

Hall of Fame Super Red

Re: Upgrade to 6.11b from 5.12 but still old phone firmware??

Hi Tony,

You are most welcome :) It is not surpising that you missed that (it could be stated much more clearly) but, yes, these files will be fine for all current 6.x versions as well.

Hope this helps!

Rob

127
Views
0
Helpful
3
Replies
CreatePlease to create content