10-28-2009 08:28 AM - edited 03-15-2019 08:16 PM
A client has unity express NM-CUE and wish to upgrade to unity express 7.x
it would be possible or it would be better to get a new module with ver 7.x.
Regards
> sh software versions
Installed Packages:
- Bootloader (Primary) 1.0.17
- Global 2.1.1
- Voice Mail 2.1.0
- Bootloader (Secondary) 2.0.0
- Core 2.1.0
- Installer 2.1.0
- Auto Attendant 2.1.0
Solved! Go to Solution.
10-28-2009 11:21 AM
Hi Filiberto,
It looks like a new module would be required :)
**Note: The NM-CUE, NM-CUE-EC are no longer supported beginning with Cisco Unity Express version 7.1.1. Cisco Unity Express on the ISM-SRE-300-K9 module and the AIM2-CUE module are supported beginning with Cisco Unity Express version 7.1.2.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_1/install/prereq.html
Hope this helps!
Rob
10-28-2009 11:21 AM
Hi Filiberto,
It looks like a new module would be required :)
**Note: The NM-CUE, NM-CUE-EC are no longer supported beginning with Cisco Unity Express version 7.1.1. Cisco Unity Express on the ISM-SRE-300-K9 module and the AIM2-CUE module are supported beginning with Cisco Unity Express version 7.1.2.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_1/install/prereq.html
Hope this helps!
Rob
10-28-2009 12:05 PM
Thanks a lot Rob,
Thanks for your time and for your clear comments.
Regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: