In our lab we tested the upgrade from CCM from 4.1(3) to 4.2(3) We applied all the proper OS Levels and Patchs prior to the upgrade. We ran the CallManager Upgrade 4.2(3) Utility before the installation and all pre-install requirements were validated.
The install went smooth. There were no visible errors. After the upgrade, all services are starting properly. However, the CCMAdmin/Main.asp and the CCMService/serviceconfig.asp will not diplay the login screen.
The are not errors being reported is the event logs. Any ideas? Thanks!
I have checked all the CCM services, IIS, WWW Publishing SVC, etc and all appear to be working.
When you go to Internet Service Manager (under Administrative Tools), expand server name, Default Website, do u see the list which has CCMAdmin, CCMUser, CCMService etc ?? If all the services are working fine, then it could be something else. Also, can u attach the IIS logs from the server (c:\WINNT\system32\LogFiles\W3SVC1) ??
Yes...all the services/folders in IIS Manager are there. I installed BARS just to see if IIS was working properly and I can access BARS no problem. Quite strange. I will look into the IIS logs and see if there are any errors.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...