Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Upgrading from Callmanager 4.1(3) to Unified Communication 6.1(2)

Can we do a direct upgrade from CM 4.1(3) to UCM 6.1(2. If yes, is there any hardware compatibility issues currently all servers are HP hardware platform running Windows 2000, how about Operating system (Windows 2000/2003? or Linux?) how about compatibility with Unity 4.2(1)?, IPCC 4.0(4)are there any issues? Any pros and cons for going 6.x?

5 REPLIES
Cisco Employee

Re: Upgrading from Callmanager 4.1(3) to Unified Communication 6

have you checked the compatibility matrix???

Supported Cisco Unified Communications Manager Upgrades

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp1168414

you will use Linux, since you do not mention the server model check the link:

Cisco Unified Communications Manager Server Support Matrix

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

for unity make sure to install the latest TSP.

SCCP Compatibility Matrix: Cisco Unity, the Cisco Unity-CM TSP, Cisco Unified CM, and Cisco Unified CM Express

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html

Cisco Unified Contact Center Express

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp1569721

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: Upgrading from Callmanager 4.1(3) to Unified Communication 6

javalenc,

This information is very helpful and I appreciate it.

Thanks.

Community Member

Re: Upgrading from Callmanager 4.1(3) to Unified Communication 6

Hi shamugalu1, let me know if your upgrade was successfull because i am going to do the same job.

Thanks,

Jose

Community Member

Re: Upgrading from Callmanager 4.1(3) to Unified Communication 6

Jose,

I haven't done yet, we have a lot of other applications that depends on the current CCM so I'm still evaluating dependencies and compatibilities.

Community Member

Re: Upgrading from Callmanager 4.1(3) to Unified Communication 6

Oh, ok shamugalu1. Please let me know how it is going.

Best wishes on that, Jose

134
Views
0
Helpful
5
Replies
CreatePlease to create content