Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrading IOS loses access to CME web console

To the 79xx iptel techs out there,

Just upgraded from cme 4.1 c2691 ipvoice to c2691entbasek9-mz.124-13b.bin version 12.4(13b)on a 2691 router

Before upgrade. Had access to web console but 7912G phone wouldn't register despite my labourious efforts

After upgrade. Have lost access to web console.

Can access http://ipaddress basic section showing diagnostics log, monitor the router etc but not the http://ipaddress/ccme.html

Gets "the webpage can't be found"

Using IE 8

Have all the necessary files for  cme 4.1

Enabled ip http path flash etc

Using local authentication

Have attached output of sh running config

Please assist further

Thanks in advance.

BTW.

Had lots of previous old discussions logged via site but seem to have disappeared.

If any one can assist with that please too...point me in the right direction..

Message was edited by: John Cheetley..sorry guys. Had power outage when was uploading attachment. Is there now. Thanks again

Everyone's tags (5)
2 REPLIES

Upgrading IOS loses access to CME web console

anyway we can see the "sh run" and "sh flash"?

Please Kudos/rate if this help!

Please Kudos/rate if this help!
Cisco Employee

Upgrading IOS loses access to CME web console

Show run is missing in attachment.


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
227
Views
0
Helpful
2
Replies
CreatePlease to create content