Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

uploading GUI

i don't know how to upload the gui files to the 2821 IP pbx.

i set up a tftp server and i'm able to upload firmwares but the "archive tar" command isn't working.. any help ?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: uploading GUI

TFTP the tar file to the router to make sure that the router actually can get to that file and that there isn't some crazy computer thing going on. What version of IOS, model of router, and TFTP client are you using? I am going to try it here...

Scott

3 REPLIES

Re: uploading GUI

The following command doesn't work?

Router# archive tar /xtract tftp://ip-address/filename flash:

If not, what error do you show?

New Member

Re: uploading GUI

this is what i'm getting

IP-PBX#archive tar /xtract tftp://10.1.30.100/cme.gui-3.3.0.3a.tar flash:

%Error opening tftp://10.1.30.100/cme.gui-3.3.0.3a.tar (No such file or director

y)

Re: uploading GUI

TFTP the tar file to the router to make sure that the router actually can get to that file and that there isn't some crazy computer thing going on. What version of IOS, model of router, and TFTP client are you using? I am going to try it here...

Scott

108
Views
5
Helpful
3
Replies
CreatePlease login to create content