Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Urgent*Forced Authorization Codes Fails using VG224 with SCCP

Hello Everyone,

Please I would ask you help to resolve an issue with the Analog VG224.

I`m implementing IPT in a site witch uses FAC codes to dial out.

Using it with IP phones witch are 20% of the overall phones,it works fine, however when trying to dial out using the analog extension of the VG224, the system does not ask for the FAC and the call fails.

Removing de FAC from the route it completes the call normally.

Does anyone has a clue why the analog is not receiving the beep to insert the code and call is failling?

Here is my config :

Thanks in advance

Thiago

Current configuration : 3210 bytes

!

! Last configuration change at 01:24:03 UTC Mon Mar 1 1993

version 15.1

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname BRBSOAVG01

!

boot-start-marker

boot-end-marker

!

!

enable secret 5 $1$ZqSc$8yV3huooMh5A4tmyIkcqJ.

!

no aaa new-model

ip source-route

!

ip cef

no ip dhcp use vrf connected

!

!

no ipv6 cef

!

stcapp ccm-group 1

stcapp

!

stcapp feature access-code

prefix #

!

!

!

stcapp supplementary-services

port 2/0

  fallback-dn 313202

!

!

!

!

!

voice service voip

modem passthrough nse codec g711ulaw

!

!

!

!

!

voice-card 0

!

!

!

!

!

!

!

interface FastEthernet0/0

ip address 10.98.48.6 255.255.254.0

duplex full

speed 100

!

interface FastEthernet0/1

no ip address

shutdown

duplex auto

speed auto

!

ip forward-protocol nd

!

no ip http server

ip route 0.0.0.0 0.0.0.0 10.98.48.1

!

!

!

control-plane

!

!

voice-port 2/0

cptone BR

!

voice-port 2/1

cptone BR

!

voice-port 2/2

cptone BR

!

voice-port 2/3

cptone BR

!

voice-port 2/4

cptone BR

!

voice-port 2/5

cptone BR

!

voice-port 2/6

cptone BR

!

voice-port 2/7

cptone BR

!

voice-port 2/8

cptone BR

!

voice-port 2/9

cptone BR

!

voice-port 2/10

cptone BR

!

voice-port 2/11

cptone BR

!

voice-port 2/12

cptone BR

!

voice-port 2/13

cptone BR

!

voice-port 2/14

cptone BR

!

voice-port 2/15

cptone BR

!

voice-port 2/16

cptone BR

!

voice-port 2/17

cptone BR

!

voice-port 2/18

cptone BR

!

voice-port 2/19

cptone BR

!

voice-port 2/20

cptone BR

!

voice-port 2/21

cptone BR

!

voice-port 2/22

cptone BR

!

voice-port 2/23

cptone BR

!

ccm-manager sccp local FastEthernet0/0

!

!

mgcp profile default

!

sccp local FastEthernet0/0

sccp ccm 10.96.32.4 identifier 1 priority 1 version 7.0

sccp

!

sccp ccm group 1

bind interface FastEthernet0/0

associate ccm 1 priority 1

!

dial-peer voice 1 pots

service stcapp

fax rate disable

port 2/0

Everyone's tags (6)
4 REPLIES
New Member

Urgent*Forced Authorization Codes Fails using VG224 with SCCP

Hi ,

I have the same problem anyone has found a solution?

Hall of Fame Super Silver

Urgent*Forced Authorization Codes Fails using VG224 with SCCP

I seem to be running into the same issue, my understanding is that forced authorization codes are supported with SCCP, though they do not seem to work, IOS 15.1.4M6.

Chris

New Member

Urgent*Forced Authorization Codes Fails using VG224 with SCCP

FAC for Analog phones behind VG gateway can be supported using a 3rd party application.

Users experiance:

  • User dials the outbound number
  • 3rd party application is invoked(IVR) and user is prompted to enter his FAC code
  • FAC code is authenticated
  • Call gets dialed out

One of our customers had SIP phones and faced the same issue of support for FAC.We solved the issue using a 3rd party application.

New Member

Urgent*Forced Authorization Codes Fails using VG224 with SCCP

I had the same issue and tried to dial the FAC + #  after dialing the destination number and it works, the problem is just that it never plays the beep asking for the code.

HTH

807
Views
0
Helpful
4
Replies
CreatePlease to create content