Urgent Please help with a Conferencing problem in CUCM 6.1
We have a configuration of CUCM 6.1. We have 24 voice ports (FXO) configured in H 323 registered with the call manger.A CUE 3.2 configured for IVR and mail box. Gateway is a Cisco 3845 and the IOS version is 12.4(15) T10
The problem is whenever a conference is configured with an outside number the FXO port is not releasing after the call disconnects.It is not FXO disconnect problem. This happens only when a conference is taking place. There is no problem with any other outside or inside calls.
I am attaching the configuration of Gateway. Please help me with the problem, I am very much thankful for you that.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...