Users are asking to be able to make changes to their own phone via a URL and I thought I set it up properly, but I am having trouble. I have typed in https://<ip.add>/<username> and receive "webpage not available" error. I have made sure to add the "test" user to the user group config under user manaagement, verified the permissions info within the end user config by adding the user to specified group and verified the role configuration.
Can someone please tell me what I'm missing? Do I need to configure something somewhere else to allow users this access?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...