Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our beta test area to get started.

New Member

User are not able to make conference call

Hi All

users from one site are not able to make the coneference calls. Prior to this users were able to make conference calls.

We have configured MGCP configuration. When we shift the traffic to PSTN. Conference calls works fine. As we shift the traffic back to WAN Link conference calls are dropping.

We had done with the changes of  Conference bridge order but no positive result found.

We tested (When the traffic is going through WAN Link)

Although the conference bridge appeared to join the 4 calls the Mobile phone rtps streams were not active

.

Each of the tests involved 2 Ip Phones and 2 Mobile phones.

When running the conference via WAN Link the mobile phones lost their RTP streams and no voice either way could be heard, however the IP phones were actively running RTP sessions and could hear voice both ways              

PFA For the Logs during the test Window

Thanks For Help

  • IP Telephony
8 REPLIES

User are not able to make conference call

Are you using hardware conferencing resources? If not, verify that you have transcoding resources.

HTH

Regards,

Yosh

HTH Regards, Yosh
New Member

User are not able to make conference call

Hi Yosh

Thanks for Replying

Yes, we are using the Hardware Conference Resources.

Regards

Chaman

User are not able to make conference call

Are you using G.729 for the WAN? Verify that the users MRGL has the hardware conferencing resources, on the top of the MRG list.

HTH

Regards,

Yosh

HTH Regards, Yosh
New Member

User are not able to make conference call

yes we have G.729 for the WAN

And have hardware conference resources on the top of MRGL

Regards

Chaman

User are not able to make conference call

Have you verified routing between the WAN, firewall, phones and your hardware resource router?

HTH

Regards,

Yosh

HTH Regards, Yosh
New Member

User are not able to make conference call

Hi Yosh

I checked the routing as well as hardware resources. But didnt find any error.

Regards,

Chaman

User are not able to make conference call

Do you have a firewall between the WAN. If so, verify with the security team that they are not seeing any blocks in traffic, during a test call.

HTH

Regards,

Yosh

HTH Regards, Yosh
New Member

User are not able to make conference call

We dont have any firewall.

Regards

Chaman

203
Views
0
Helpful
8
Replies