Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

User authentication to make STD/ISD call

Hi,

We are using Cisco call manger 4.2.Now we want to configure authentication for indivisual user before making STD and ISD call.I have allocated those users under calling search space group 2 which is for STD/ISD.Now how to authenticate per user before making call.Please guide in this matter..

Thanks,

somnath

5 REPLIES

Re: User authentication to make STD/ISD call

as u mentioned u have grouped them in a CSS

now creat a partion for example call it p1

includ this partion in the usres group in ur CSS

then make a route pattren to the desired number or numbers and put it in partion p1

now only those users in that CSS with partion p1 inout example will have access on the route pattren

now u can configure authentication for them as the following:

Creating Forced Authorization Codes

It works this way: when a call is placed that requires an authorization code, a double beep is heard that alerts the caller to enter the code. After the code is entered, the call is completed.

Enabling FACs requires that FACs exist and that the route patterns that are to be restricted are configured to require an FAC. The following steps show how to accomplish both of these tasks.

Create a Forced Authorization Code

Step 1. From within CCMAdmin, select Feature>Forced Authorization Code.

Step 2. Click the Add a New Forced Authorization Code link

Step 3. In the Authorization Code Name field, enter a name for this code. Choose a name that helps identify the code. This name displays in authorization code reports that can be produced.

Step 4. In the Authorization Code field, enter a numeric code. This is the code a caller will have to enter to place calls that require authorization.

Step 5. In the Authorization Level field, enter a numeric value between 0 and 255. This value determines the authorization level of this code. In order for the code to allow a call, the value in this field must be equal to or greater than the value assigned to the pattern.

Step 6. Click the Insert button to add this code. After the code is created, the status line displays "Insert completed."

Assign a Forced Authorization Code to a Route Pattern

Step 1. From within CCMAdmin, select Route Plan>Route/Hunt>Route Pattern.

Step 2. Enter search criteria in the search field to limit the results and click the Find button.

Step 3. From the list that displays, select the route pattern to which you wish to add an FAC.

Step 4. Check the Require Forced Authorization Code box and enter a numeric value in the Authorization Level field. This value is used to determine which FACs have the right to use this pattern. An FAC must have a value equal to or greater than this value in order to be granted access

Step 5. Click the Update button to apply FAC to this pattern.

Step 6. Repeat these steps for all other route patterns on which you wish to enable FAC.

OR UCAN USE Create a Client Matter Code

Step 1. From within CCMAdmin, select Feature>Client Matter Code.

Step 2. Click the Add a New Client Matter Code link.

Step 3. In the Client Matter Code field, enter the desired code

Step 4. In the Description field, enter a description that identifies the client or project with which this code is associated.

Step 5. Click the Insert button to add this code. After the code is created, the status line displays "Insert completed."

Assign a Client Matter Code to a Route Pattern

Step 1. From within CCMAdmin, select Route Plan>Route/Hunt>Route Pattern.

Step 2. Enter search criteria in the search field to limit the results and click the Find button.

Step 3. From the list that displays, select the route pattern to which you wish to add a CMC.

Step 4. Check the Require Client Matter Code box

Step 5. Click the Update button to apply the CMC requirement to this pattern.

Step 6. Repeat these steps for all other route patterns on which you wish to require CMC.

source is Cisco press

and male sure that the phones u wan them to to put a code are in a CSS that contains the partion of the route pattren with authentication

good luck

please, if helpful Rate

New Member

Re: User authentication to make STD/ISD call

Hi,

Thanks!

But suppose I want to give STD facility to 3 users only.In the above process all the 3 user will get the same key to activate the call.How to give 3 different key to 3 users.So that individual can call STD with their own key only.Please guide..

Is there any process to lock the ip phone with security code like analog phone.

Regards,

som

Re: User authentication to make STD/ISD call

in this case use client matter code as mentioned above

creat three codes give each user a code

Creating CMC Codes

Complete the following steps to add CMCs in Cisco CallManager Administration:

Step 1. In Cisco CallManager Administration, choose Feature > Client Matter Code.

Step 2. In the upper-right corner of the window, click the Add a New Client Matter Code link.

Step 3. In the Client Matter Code field, enter a unique code of no more than 16 digits that users will enter when placing a call

Step 4. In the Description field, enter a name of no more than 50 characters. This optional field associates a client code with a client.

Step 5. Click Insert

Enabling Route Patterns for CMC

Complete the following steps to enable route patterns for FAC and CMC:

Step 1. In Cisco CallManager Administration, choose Route Plan > Route/Hunt > Route Pattern.

Step 2. Open the properties window for the route pattern you want to modify.

Step 3. If you are configuring the route pattern for CMC, check the Require Client Matter Code check box

good luck

if helpful Rate

New Member

Re: User authentication to make STD/ISD call

Hi,

now the question is if any user use any other phone to make STD call by using his own CCM, how to get/identify that one?

Reagrds,

som

New Member

Re: User authentication to make STD/ISD call

Hi

How to get the authorization code reports ?

4043
Views
4
Helpful
5
Replies
CreatePlease to create content