08-21-2009 09:33 AM - edited 03-15-2019 07:28 PM
Is it possible to use the 7960G IP phone with CME 7.1?
I have a new 2851 Voice bundle and I can't get the phone to download a firmware/config.
Thanks in advance,
--Brandon
08-21-2009 10:09 AM
The 7960G is supported:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme71spc.htm
SIP Loads:
P0S3-08-6-02.loads*
P0S3-08-6-02.sb2
P0S3-08-6-02.sbn
SCCP Loads:
P00308000500.loads*
P00308000500.sb2
P00308000500.sbn
Make sure you have downloaded and installed those files on your flash:. You will also need to have file in your TFTP statements within the router config.
08-21-2009 10:16 AM
Thanks. I was able finally able to get it to load P00308010100, but now i'm strugglign with the config -- it keeps saying it can't find XMLDefault.cnf.xml
08-21-2009 12:58 PM
You have not entered the mac address correctly under ephone then.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: