Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Using 7960G with CME 7.1

Is it possible to use the 7960G IP phone with CME 7.1?

I have a new 2851 Voice bundle and I can't get the phone to download a firmware/config.

Thanks in advance,

--Brandon

3 REPLIES
Bronze

Re: Using 7960G with CME 7.1

The 7960G is supported:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme71spc.htm

SIP Loads:

P0S3-08-6-02.loads*

P0S3-08-6-02.sb2

P0S3-08-6-02.sbn

SCCP Loads:

P00308000500.loads*

P00308000500.sb2

P00308000500.sbn

Make sure you have downloaded and installed those files on your flash:. You will also need to have file in your TFTP statements within the router config.

Bronze

Re: Using 7960G with CME 7.1

Thanks. I was able finally able to get it to load P00308010100, but now i'm strugglign with the config -- it keeps saying it can't find XMLDefault.cnf.xml

Hall of Fame Super Gold

Re: Using 7960G with CME 7.1

You have not entered the mac address correctly under ephone then.

430
Views
0
Helpful
3
Replies