Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using BAT to change from 4 digit DN's to 5 digit DN's

I have BAT 4.3 and have been researching in the users guide if this is a possiblity. Anyone ever do something similar?

one site has 34 users and the other has over 200.

1 REPLY
New Member

Re: Using BAT to change from 4 digit DN's to 5 digit DN's

Complete these steps in order to migrate the device profiles from the 7960 IP phone to the 7970 IP phone.

Access the Bulk Administration Tool (BAT) and choose Configure > User Device Profiles (UDP).

Click Export and name the file.

Choose All User Device Profile Details, select the phone type, and click Export. The file is then placed in the C:\BatFiles\Export\User Device Profiles directory.

Make the small changes to the user device profile that points to xyz.

Once completed, place the new file in the C:\BatFiles\User Device Profiles directory.

Go to the BAT tool and choose Configure > User Device Profiles (UDP).

Choose Insert User Device Profiles and scroll down for your file at File Name*.

Choose All Details, scroll down for the xyz, and click Insert.

For more info:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_book09186a0080530796.html

110
Views
0
Helpful
1
Replies