Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Using BAT

Hello,

I need to setup 75 7962 IP Phones.  What is the best procedure on doing so using BAT.  I have never used the tool.  All phones need the same config except the DN.  We have a block a 75 DIDs.  Any help would be appreciated.

Thanks,

Jaime

1 REPLY
Cisco Employee

Re: Using BAT

Download the bat.xlt and use it to create a template for those phones.

This is the link to the tool help and how to use it for all the procedures.

Cisco Unified Communications Manager Bulk  Administration Guide, Release 8.0(2)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/8_0_2/bat-802-cm.html

All the related elements you'll use need to be already configured in CUCM (partitions, device pools, MRGLs, etc)

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
281
Views
0
Helpful
1
Replies