Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using COR to Limit a lobby phone attached to an FXS port

I have a lobby phone that is attached to an FXS port and want to use COR to limit the user to internal, 911 and local calling. Basically block LD. How do I attach the COR list to the FXS port? The examples attach it to an ephone-dn.

2 REPLIES
Hall of Fame Super Gold

Re: Using COR to Limit a lobby phone attached to an FXS port

Since you are not using the FXS port in SCCP mode, the simplest thing is to configure a voice translation-rule and translation-profile that rejects calls beginning with the LD prefix. You apply it directly under voice port.

Re: Using COR to Limit a lobby phone attached to an FXS port

If you want to use the example, just make this modification:

voice-port 0/0/0

station-id number 1234

dial-peer voice 1 pots

answer-address 1234

corlist incoming

-nick

139
Views
0
Helpful
2
Replies