Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Using dashes in CUCM user telephone numbers

Hello,

I have a customer for whom I am deploying CUCM 9.1 and integrating with Active Directory.

They have populated the ipPhone field using numbers in the format 123-4567.

CUCM imports the users and from the Help page it seems that the "-" character is supported, as are "(" and ")", but I want to check whether using numbers in this format is likely to cause any issues.

FYI they will also be using Jabber and are not willing to move to E.164 DNs.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Using dashes in CUCM user telephone numbers

Dashes and parenthesis are OK and will be ignored by CUCM when the number is dialed.

HTH,

Chris

3 REPLIES
Hall of Fame Super Silver

Using dashes in CUCM user telephone numbers

Dashes and parenthesis are OK and will be ignored by CUCM when the number is dialed.

HTH,

Chris

Using dashes in CUCM user telephone numbers

Thanks Chris,

My worry was that Jabber or other product would not be compatible.

Hall of Fame Super Silver

Using dashes in CUCM user telephone numbers

No problem there either as it is ultimately CUCM that dials the number.

HTH,

Chris

139
Views
5
Helpful
3
Replies
CreatePlease login to create content