I'm trying to setup IP Communicator for use with IPCC Express. The issue I'm having is when the agents try to log in using the IP Communicator they can log in but when they select to make themselvs ready they are getting a message saying requesting and then it eventually times out with host not found message. Any suggestions.
You have to associate the device name (mac address) you are using for your ip communicator with the rm user for ipcc in the global directory. Also be sure that the same device is associated with your user id in global directory. Otherwise, you will not be able to change ready states in Agent Desktop.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...