Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using SLB to provide Extension Mobolity redundancy

Hi there,

I would like to use SLB to provide Extension Mobility redundancy in CUCM 6.1 as per the URL

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008097cd93.shtml

Does anyone have any sample configs for the SLB part please? (Going to use Cat65k running IOS)

thanks

David

2 REPLIES
Anonymous
N/A

Re: Using SLB to provide Extension Mobolity redundancy

In order to provide redundancy for the Cisco CallManager Cisco IP Phone Services (or URL Services) and the EM phone service components, Cisco recommends using the Server Load Balancing (SLB) feature available in Cisco IOS to front-end multiple Unified CM nodes. The Cisco IOS SLB feature provides a virtual-IP-to-real-IP address mapping, that front-ends the real IP addresses of the Unified CM nodes. The SLB feature can be configured to monitor the status of multiple nodes, automatically redirecting requests during failure events. By using the SLB virtual IP address (or DNS hostname) for the URL Services and EM IP phone service, you can ensure that both components are still available during any node failure and, therefore, EM login and logouts will continue.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122sx/12218sxd/slbsxd1.htm

http://www.cisco.com/en/US/docs/ios/12_1/12_1e5/feature/guide/iosslb5e.html

New Member

Re: Using SLB to provide Extension Mobolity redundancy

Hi, thanks but I had already read these. I have since developed a test lab and prototyped the solution so I now have my own configs.

It works but there is a delay of about 2 mins when the Publisher is offline. I guess that the Subs are timing out writing to the Pub

186
Views
0
Helpful
2
Replies
CreatePlease to create content