I am currently using my UC500 system with SIP trunks provided by Paetec. I want to use Skype as second SIP provider for LD. I would like to be able to make use of both at the same time whereby calls starting with "9" match Paetec SIP dial-peers and calls starting with "6" match Skype dial-peers.
The problem is that the sip-ua section of the config has parameters to register with Paetec. Since the sip-ua section seems to be global how would I register with Skype? Better yet, if I do not have any incoming service from Skype do I need to SIP register at all? Can't I just point a dial-peer to their servers and go?
When you setup your Skype Connect account (new name for Skype for SIP) in your profile under authentication options you have the option for registration or IP authentication. Maybe you can use IP address authetication and not need to worry about registration at all?
They also have documents explaining setup and one particularly for UC500.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...