Has anyone ever run into issues in sending the LEC:
1. Local calls with a '1' prefix to the LEC (e.g., if your local area code is 212, and you send the LEC 1-212-555-1212). Although I imagine this will work in most areas, I seem to remember that being a problem in some instances where the LEC will reject the call.
2. Sending the LEC 10-digits for Local Calls where you are in a 7-digit Local Calling area. Again, I imagine this will work in most areas, but I'm wondering if someone has seen a LEC choke on this.
Paolo, are you saying that you think in an area that uses 7-digit dialing for Local Calls, 10-digit local calls should always work if you set the Number Type to National? Say area code is 280, and they use 7-digit dialing for Local Calls there You send:
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...