Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

very short trunk

hi guys...what possible trunk can be connected between pbx and cisco router in short cable (5 meter)? is it E1/T1... ops.. by the way do we only need plain e1/t1 without kind of signal such pri? please help... beside that how dialpeer would map to this trunk? please teach me. tx very very much...

Hall of Fame Super Gold

Re: very short trunk

5m is not a problem. Please use correctly twisted cable as per pinout.

If possible at all, configure the PBX as PRI. If absolutely not possibile, tell us that choices do you have, what do you want to do, and we can suggest something.

New Member

Re: very short trunk

basically i want to replace fxo cable from router to pbax port which are 20 cable/line with single trunk and i still wonder how another additional setting and dialpeer config that need modified in place of existing dialpeer. would you please helps? tx :)

Hall of Fame Super Gold

Re: very short trunk

Please state type of pbx use, type of interfaces on the pbx, and dialplan in use.

CreatePlease to create content