Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG 224 and Toner/Probe

A client of ours mentioned that a Cisco tech told them not to use a toner/probe to trace analog telephone lines that were connected to a Cisco VG224.

Is this correct and what if so what would the reason be?

Thankyou

DJE

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Red

Re: VG 224 and Toner/Probe

Hi Douglas,

We've been working with VG248's and 224's for some time now

and on many occasions have used a Tone generator and Probe

to locate lines without issue. I'm not sure where the Tech came

up with this info....I just did a thorough search of Bugs/Caveats

and install/troubleshooting docs without finding any such reference.

Cheers!

Rob

Hall of Fame Super Gold

Re: VG 224 and Toner/Probe

Agree with Rob (rated), do not believe such a strange recommendation.

3 REPLIES
Hall of Fame Super Red

Re: VG 224 and Toner/Probe

Hi Douglas,

We've been working with VG248's and 224's for some time now

and on many occasions have used a Tone generator and Probe

to locate lines without issue. I'm not sure where the Tech came

up with this info....I just did a thorough search of Bugs/Caveats

and install/troubleshooting docs without finding any such reference.

Cheers!

Rob

Hall of Fame Super Gold

Re: VG 224 and Toner/Probe

Agree with Rob (rated), do not believe such a strange recommendation.

New Member

Re: VG 224 and Toner/Probe

Thanks guys,  yeah I thought it was strange,  so thought I'd better check it out.

346
Views
5
Helpful
3
Replies