Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VG 224

I have 2 VG224 gateways in my network. The first one is working fine, i'm having issues with the second one.

After troubleshooting the unit i found out the the voltage i'm getting for voice ports is very low. It's aroung 10V per port.

I remember i had similar issue long time ago but i don't really remember what the command i used to bring the port voltage up. Any help?

5 REPLIES
Bronze

Re: VG 224

Use the command “alt-battery-feed feed2” to bring the port voltage up.

New Member

Re: VG 224

Is this a voice-port command? I don't see it as an option under commands.

thanks

Re: VG 224

it's a hidden command. try putting it in, and the router should take it.

-nick

New Member

Re: VG 224

this hidden cisco command doesnt work under my vg224 fxs port

vg ios : vg224-i6s-mz.124-5b.bin

Re: VG 224

Hi,

It'll be accepted after upgrading your ios

But this command won't raise your output volt to -48 v, only it'll be about 38 or 39, so you may need an extra transformer on the needed line to have more voltage

thanks

406
Views
0
Helpful
5
Replies