Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG-224

Just recieved my first VG-224. I have programmed it into the Call Manager. That was the easy part. What do I do with the box itself? MGCP? IP Address?

  • IP Telephony
2 REPLIES
New Member

Re: VG-224

Yes you need to setup ip address and the dial-peers that you will need along with maybe AAA , logging remember it?s kind of a router. By the way sometimes VG224 come by default with no ip routing , be sure to type , ip routing to enable routing sometime you dont get audio bidirectional becuase of this. Im sending here a sample config for a VG 224 it?s kind of the one I use.

MGCP?? sound ok ??

!

interface FastEthernet0/0

description xxxxxxxxxx

ip address x.x.x.x 255.255.255.0

no ip redirects

duplex full

speed 100

!

ccm-manager redundant-host x.x.x.x

ccm-manager mgcp

!

mgcp

mgcp call-agent x.x.x.x 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

mgcp package-capability sst-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp fax t38 inhibit

mgcp bind control source-interface FastEthernet0/0

mgcp bind media source-interface FastEthernet0/0

!

mgcp profile default

!

!

!

dial-peer voice 23 pots

description xxxx

service mgcpapp

max-conn 2

port 2/23

Re: VG-224

You the man. The IP Route fixed my problem. need to have static route

Thanks!

202
Views
5
Helpful
2
Replies
This widget could not be displayed.