Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG 2921 E1 problems

Hii,

 

I have a problem with the calls on 3 E1 lines and I don't now where is the problem.

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)

128 PMDM

Work fin until today, no update was made and the Providers told me that they see administratively down 

1.

E1 0/0/0 is up.
  Applique type is Channelized E1 - balanced
  No alarms detected.
  alarm-trigger is not set
  Version info FPGA Rev: 08121917, FPGA Type: PRK4
  Framing is CRC4, Line Code is HDB3, Clock Source is Line.
  International Bit: 1, National Bits: 11111
  Data in current interval (653 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
  Total Data (last 24 hours)
     0 Line Code Violations, 0 Path Code Violations,
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
E1 0/0/1 is up.
  Applique type is Channelized E1 - balanced
  No alarms detected.
  alarm-trigger is not set
  Version info FPGA Rev: 08121917, FPGA Type: PRK4
  Framing is CRC4, Line Code is HDB3, Clock Source is Line.
  International Bit: 1, National Bits: 11111
  Data in current interval (653 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
  Total Data (last 24 hours)
     0 Line Code Violations, 8 Path Code Violations,
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     2 Errored Secs, 2 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
E1 0/0/2 is up.
  Applique type is Channelized E1 - balanced
  No alarms detected.
  alarm-trigger is not set
  Version info FPGA Rev: 08121917, FPGA Type: PRK4
  Framing is CRC4, Line Code is HDB3, Clock Source is Line.
  International Bit: 1, National Bits: 11111
  Data in current interval (653 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
  Total Data (last 24 hours)
     0 Line Code Violations, 0 Path Code Violations,
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

 

 

 

 


2.

 

ISDN Serial0/0/0:15 interface
        dsl 0, interface ISDN Switchtype = primary-net5
        L2 Protocol = Q.921 0x0000  L3 Protocol(s) = CCM MANAGER 0x0003
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Active dsl 0 CCBs = 0
    The Free Channel Mask:  0xFFFF7FFF
    Number of L2 Discards = 0, L2 Session ID = 90

%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output may not apply

ISDN Serial0/0/1:15 interface
        dsl 1, interface ISDN Switchtype = primary-net5
        L2 Protocol = Q.921 0x0000  L3 Protocol(s) = CCM MANAGER 0x0003
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Active dsl 1 CCBs = 0
    The Free Channel Mask:  0xFFFF7FFF
    Number of L2 Discards = 0, L2 Session ID = 73

%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 2. Layer 3 output may not apply

ISDN Serial0/0/2:15 interface
        dsl 2, interface ISDN Switchtype = primary-net5
        L2 Protocol = Q.921 0x0000  L3 Protocol(s) = CCM MANAGER 0x0003
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Active dsl 2 CCBs = 0
    The Free Channel Mask:  0xFFFF7FFF
    Number of L2 Discards = 0, L2 Session ID = 15

%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 8. Layer 3 output may not apply

 

 

 

3.

 

hq-vg-2921-02#show mgcp endpoint

Interface E1 0/0/0

             ENDPOINT-NAME    V-PORT     SIG-TYPE   ADMIN
  S0/SU0/ds1-0/1@hq-vg-2921  0/0/0:15        none   down
  S0/SU0/ds1-0/2@hq-vg-2921  0/0/0:15        none   down
  S0/SU0/ds1-0/3@hq-vg-2921  0/0/0:15        none   down
  S0/SU0/ds1-0/4@hq-vg-2921  0/0/0:15        none   down
  S0/SU0/ds1-0/5@hq-vg-2921  0/0/0:15        none   down
  S0/SU0/ds1-0/6@hq-vg-2921  0/0/0:15        none   down
  S0/SU0/ds1-0/7@hq-vg-2921  0/0/0:15        none   down
  S0/SU0/ds1-0/8@hq-vg-2921  0/0/0:15        none   down
  S0/SU0/ds1-0/9@hq-vg-2921  0/0/0:15        none   down
  S0/SU0/ds1-0/10@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/11@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/12@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/13@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/14@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/15@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/17@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/18@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/19@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/20@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/21@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/22@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/23@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/24@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/25@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/26@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/27@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/28@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/29@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/30@hq-vg-292  0/0/0:15        none   down
  S0/SU0/ds1-0/31@hq-vg-292  0/0/0:15        none   down


Interface E1 0/0/1

             ENDPOINT-NAME    V-PORT     SIG-TYPE   ADMIN
  S0/SU0/ds1-1/1@hq-vg-2921  0/0/1:15        none   down
  S0/SU0/ds1-1/2@hq-vg-2921  0/0/1:15        none   down
  S0/SU0/ds1-1/3@hq-vg-2921  0/0/1:15        none   down
  S0/SU0/ds1-1/4@hq-vg-2921  0/0/1:15        none   down
  S0/SU0/ds1-1/5@hq-vg-2921  0/0/1:15        none   down
  S0/SU0/ds1-1/6@hq-vg-2921  0/0/1:15        none   down
  S0/SU0/ds1-1/7@hq-vg-2921  0/0/1:15        none   down
  S0/SU0/ds1-1/8@hq-vg-2921  0/0/1:15        none   down
  S0/SU0/ds1-1/9@hq-vg-2921  0/0/1:15        none   down
  S0/SU0/ds1-1/10@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/11@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/12@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/13@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/14@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/15@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/17@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/18@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/19@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/20@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/21@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/22@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/23@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/24@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/25@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/26@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/27@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/28@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/29@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/30@hq-vg-292  0/0/1:15        none   down
  S0/SU0/ds1-1/31@hq-vg-292  0/0/1:15        none   down


Interface E1 0/0/2

             ENDPOINT-NAME    V-PORT     SIG-TYPE   ADMIN
  S0/SU0/ds1-2/1@hq-vg-2921  0/0/2:15        none   down
  S0/SU0/ds1-2/2@hq-vg-2921  0/0/2:15        none   down
  S0/SU0/ds1-2/3@hq-vg-2921  0/0/2:15        none   down
  S0/SU0/ds1-2/4@hq-vg-2921  0/0/2:15        none   down
  S0/SU0/ds1-2/5@hq-vg-2921  0/0/2:15        none   down
  S0/SU0/ds1-2/6@hq-vg-2921  0/0/2:15        none   down
  S0/SU0/ds1-2/7@hq-vg-2921  0/0/2:15        none   down
  S0/SU0/ds1-2/8@hq-vg-2921  0/0/2:15        none   down
  S0/SU0/ds1-2/9@hq-vg-2921  0/0/2:15        none   down
  S0/SU0/ds1-2/10@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/11@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/12@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/13@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/14@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/15@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/17@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/18@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/19@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/20@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/21@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/22@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/23@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/24@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/25@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/26@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/27@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/28@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/29@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/30@hq-vg-292  0/0/2:15        none   down
  S0/SU0/ds1-2/31@hq-vg-292  0/0/2:15        none   down


Interface E1 0/0/3

             ENDPOINT-NAME    V-PORT     SIG-TYPE   ADMIN

BRI/S0/SU2/P0/1@hq-vg-2921-02
BRI/S0/SU2/P0/2@hq-vg-2921-02
BRI/S0/SU2/P1/1@hq-vg-2921-02
BRI/S0/SU2/P1/2@hq-vg-2921-02
aaln/S1/SU0/0@hq-vg-2921-02
aaln/S1/SU0/1@hq-vg-2921-02
aaln/S1/SU0/2@hq-vg-2921-02
aaln/S1/SU0/3@hq-vg-2921-02
aaln/S1/SU0/4@hq-vg-2921-02
aaln/S1/SU0/5@hq-vg-2921-02
aaln/S1/SU0/6@hq-vg-2921-02
aaln/S1/SU0/7@hq-vg-2921-02
aaln/S1/SU0/8@hq-vg-2921-02
aaln/S1/SU0/9@hq-vg-2921-02
aaln/S1/SU0/10@hq-vg-2921-02
aaln/S1/SU0/11@hq-vg-2921-02
aaln/S1/SU0/12@hq-vg-2921-02
aaln/S1/SU0/13@hq-vg-2921-02
aaln/S1/SU0/14@hq-vg-2921-02
aaln/S1/SU0/15@hq-vg-2921-02
aaln/S1/SU0/16@hq-vg-2921-02
aaln/S1/SU0/17@hq-vg-2921-02
aaln/S1/SU0/18@hq-vg-2921-02
aaln/S1/SU0/19@hq-vg-2921-02
aaln/S1/SU0/22@hq-vg-2921-02

  • IP Telephony
2 REPLIES
New Member

  I manage to up the E1 lines

 

 

I manage to up the E1 lines. I start the debug isdn q931 and I see:

When I enter the show voice calls status I receive ( No active calls found ).

It's strange because with debug I see calls with:

-Display i = 'REQUESTED CHANNEL NOT AVAILABLE'show voice call status

- Cause i = 0x82AC - Requested circuit/channel not available

 

 

 

 

*Oct 15 13:17:09.040: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref = 0x00B8
        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
        Calling Party Number i = 0x0081, '256251359'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0x80, '0724524001'
                Plan:Unknown, Type:Unknown
*Oct 15 13:17:09.148: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x80B8
        Cause i = 0x82AC - Requested circuit/channel not available
        Display i = 'REQUESTED CHANNEL NOT AVAILABLE'
*Oct 15 13:17:16.724: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref = 0x00B9
        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
        Calling Party Number i = 0x2183, '256257850'
                Plan:ISDN, Type:National
        Called Party Number i = 0x80, '0256302393'
                Plan:Unknown, Type:Unknown
*Oct 15 13:17:16.828: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x80B9
        Cause i = 0x82AC - Requested circuit/channel not available
        Display i = 'REQUESTED CHANNEL NOT AVAILABLE'

 

 

 

Interface E1 0/0/0

             ENDPOINT-NAME    V-PORT     SIG-TYPE   ADMIN
  S0/SU0/ds1-0/1@hq-vg-2921  0/0/0:15        none   up
  S0/SU0/ds1-0/2@hq-vg-2921  0/0/0:15        none   up
  S0/SU0/ds1-0/3@hq-vg-2921  0/0/0:15        none   up
  S0/SU0/ds1-0/4@hq-vg-2921  0/0/0:15        none   up
  S0/SU0/ds1-0/5@hq-vg-2921  0/0/0:15        none   up
  S0/SU0/ds1-0/6@hq-vg-2921  0/0/0:15        none   up
  S0/SU0/ds1-0/7@hq-vg-2921  0/0/0:15        none   up
  S0/SU0/ds1-0/8@hq-vg-2921  0/0/0:15        none   up
  S0/SU0/ds1-0/9@hq-vg-2921  0/0/0:15        none   up
  S0/SU0/ds1-0/10@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/11@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/12@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/13@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/14@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/15@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/17@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/18@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/19@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/20@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/21@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/22@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/23@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/24@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/25@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/26@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/27@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/28@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/29@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/30@hq-vg-292  0/0/0:15        none   up
  S0/SU0/ds1-0/31@hq-vg-292  0/0/0:15        none   up

Cisco Employee

try changing the channel

try changing the channel order 

52
Views
0
Helpful
2
Replies
This widget could not be displayed.