Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG200 and CMM with UCM 6.1

Hi all;

I have an upgrade from 4.1 to 6.1 and I have VG200 and a couple of CMM modules...I need a document from cisco that tells the minimum IOS version for VG and CMM in order to work with new callmanager version...I tried so hard searching for any but in vain.

Thanks

Everyone's tags (4)
1 REPLY
Hall of Fame Super Red

Re: VG200 and CMM with UCM 6.1

Hi Ahmed,

The reason you are having trouble finding support

docs for these two products is because they are

both EoL (End of Life). That does not mean they won't work

they just aren't tested with the newest CUCM versions;

End-of-Sale and End-of-Life Announcement for the Cisco Catalyst 6500 Series and Cisco 7600 Series Communication Media Modules

http://www.cisco.com/en/US/prod/collateral/modules/ps2706/end_of_life_notice_c51-495784.html


End-of-Sale Announcement for the Cisco VG200 Access Gateway

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/prod_eol_notice09186a008032d4d4.html

**Try these widely accepted versions**

VG200

The IOS on the download page is 12.3.(26)

CMM

The IOS available wscmm-ipvoice-mz.124-15.T9.bin.

Hope this helps!

Rob

331
Views
0
Helpful
1
Replies