04-28-2008 11:36 PM - edited 03-15-2019 10:21 AM
Hi,
Has anyone used VG200 with UCM 6.1 and can confirm if its supported.
I have seen the Admin Guide for UCM 6.1, which states the step to add MGCP gateways and mentions "From the Gateway Type drop-down list box, choose one of the following MGCP gateways:
â¢Cisco VG200"
Can someone please confirm this.
-> Sushil
04-29-2008 07:50 AM
Hi Sushil
I'm looking at my CUCM 6.1.1 server from the lab and when i click on add for GWs i get:
Cisco VG200
Cisco VG248 Gateway
VG224
If i choose VG200 i automatically get the config using MGCP
HTH
javalenc
if this helps, please rate
04-29-2008 07:57 AM
Hi Javalenc,
Thanks for the information. This is what I found in the admin guide.
Hopefully it should be supported.
Just wanted to cross verify if someone is already deployed this.
Thanks.
-> Sushil
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide